TM 9-4910-703-14&P
INTRODUCTION
The adapter set, Model 501-0, is for use in making test connections to 24 volt
waterproof electrical systems in use on wheeled vehicles.
It consists of the following five (5) adapters:
Generator adptr
FSN 4910-092-9026
Regulator adptr
FSN 4910-092-9025
High tension adptr
FSN 4910-356-7504
Ignition unit adptr
FSN 4910-356-7508
Distributor primary adptr
FSN 4910-356-7492
CONNECTION PROCEDURE FOR CHARGING CIRCUIT
GENERATOR ADAPTER:
1.
Disconnect generator cable at generator and plug generator adapter into
socket.
Reconnect generator cable to free end of generator adapter.
2.
(See Figure
1.)
REGULATOR ADAPTER:
Disconnect regulator cable at regulator and plug adapter into regulator
1.
socket.
(See Figure
Reconnect regulator cable to free end of regulator adapter.
2.
2.)
1
