TM 9-4910-706-14&P
OWNER'S MANUAL
LEAK EXPOSER AND DRYER
MODELS 17 AND 20
Leak Exposer and Dryer will quickly evaporate all moisture from both
inside and outside of radiators and heater cores. After vat cleaning and flushing,
the radiator must be thoroughly dry inside before leak testing. Also after radiator
is repairedv it should be dry before painting. The Leak Exposer substantially reduces
the time required for natural drying.
This equipment is constructed of the highest quality material and is manufactured
in accordance with
strict quality assurance standards.
Your machine is equipped with a damper for regulating the amount of warm air to
either the inside or outside of the unit to be dried. A
burner and
a forced draft blower control air temperature and velocity for maximum efficiency.
The information contained in this manual will help you take advantage of all the
features built into your machine for increased production.
Please read the instructions carefully.
1.
SPECIFICATIONS
MODEL 17
MODEL 20
Overall Dimensions
39" left to right
48" left to right
36" front to back
36" front to back
36" high
36" high
Burner Capacity:
36,600 BTU/Hour
46,600 BTU/Hour
Net Weight:
303 lbs.
340 lbs.
BOTH UNITS
Electrical:
1/4 H.P. Motor 115/60/1
5.2 AMPS
Burner Orifice Size:
5/64" for Bottled
7/64" for Natural Gas
Gas (Water Column) Pressure:
4" Natural Gas
11" Bottled
NOTE :
The following information and procedures apply to both the Model 17 and 20.
Page 2
