TM 9-4910-706-14&P
6.3.3.
Short in wiring or wrong voltage. Voltage is 115 volts.
Check all contacts and wiring circuits.
6.3.4.
Blown Fusetron.
Replace.
Loose timer control knob preventing timer shaft from turning
6.3.5.
on.
6.3.6.
Obstruction in burner orifice. Remove and clean. If
burner still fails to ignite, replace Baso Valve.
6.4
Burner Fails to Extinguish When Timer Shuts Off. Probable Causes.
6.4.1.
Short circuit with limit controls in grounded side of circuit.
Remove cause of short.
6.5.
Motor and Blower fail to operate.
Probable Causes.
Power cord not plugged in.
6.5.1.
6.5.2.
Blown fusetron.
Replace.
6.5.3.
Short or loose connection in timer circuit. Check all
contacts and circuit wiring.
6.5.4.
Loose timer knob preventing timer shaft from turning on.
6.5.5.
Motor burned out. Replace.
6.5.6
Timer damaged or broken.
Replace.
Page
6
