TM 9-4910-710-14&P
1.
DO
NOT
LOAD
WHEEL
DOLLY
BEYOND
ITS
RATED
CAPACITY.
2.
USE
ON
HARD
LEVEL
SURFACES
ONLY.
3.
ALWAYS
CENTER
LOAD
ON
CARRIAGE
ASSEMBLY.
4
FAILURE TO HEED THESE WARNINGS AND CAUTIONS MAY
RESULT IN LOSS OF LOAD, DAMAGE TO EQUIPMENT AND/
OR FAILURE RESULTING IN PERSONAL INJURY OR
PROPERTY DAMAGE
TO REMOVE WHEEL
Lift vehicle until wheel clears the floor, and support vehicle with
1.
Do not lift vehicle with
safety stands (trestles, motor vehicle).
wheel dolly.
2.
Place wheel dolly in position
with
lifting
arms
straddling
the
underside of the tire.
3.
Close release valves and pump handle
to
raise
carriage
assembly
until it just contacts the tire.
4.
Adjust adjusting screw above rear
caster
to
align
lifting
arms
parallel to axle or spindle.
Place chain around tire and fasten securely.
5.
Pump handle until weight of tire is on lifting arms.
6.
Pull dolly and wheel away from vehicle and lower carriage by slowly
7.
turning release valve counterclockwise.
TO
REPLACE
WHEEL
1.
Secure
wheel
to
carriage
assembly
with
chain
provided.
2.
Position
wheel
dolly
under
vehicle
and
raise
wheel
to
appropriate
height.
Adjust adjusting
screw
above
rear
caster
to
align
wheel
with
spindle
3.
or axle.
2
