NOTE:
5.4.
PAINT
Baffle Plate at rear of booth must be kept
5.4.1. EXTERIOR PAINT. Exterior surfaces
have been coated with Epoxy Red Oxide Metal
clean. Excessive build up of paint on the
Primer (Cat. #4016-P) and finished with a tough
baffle will cause the water to spray.
chemical resistant twocomponent catalyzed poly-
4.3.4. Paint radiator with spray gun provided.
urethane safety orange (Cat. #4024). Clean and
use special non-insulating black radiator paint,
repaint surfaces as needed to preserve a good
Catalog No. 2029.
finish and an attractive appearance.
PREVENTATIVE MAINTENANCE
5.4.2. INTERIOR PAINT. The interior is coated
with Epoxy Red Oxide Metal Primer, Cat. #4016-P
FAN BLADES. Periodically remove baf-
5.1.
and then coated with Spray Booth Coating. This
fle plate and clean fan blades of dried paint.
protective coating prevents paint build up. When
CAUTION:
paint in interior is excessive, peel off coating and
Disconnect motor power plug before cleaning.
respray. Spray Booth Coating, Cat. #4030 is thin-
5.2.
HOIST. Oil hoist mechanism and pulley
ned with Thinner, Cat. #4030-A.
with SAE 20 W oil.
5.3.
SNAP-ON CONNECTIONS. Snap-on cou-
plings require special washers. Replace as re-
quired.
