TM 9-2330-381-14
2-28.
SINGLE WINCH LOADING AND UNLOADING (U.S.M.C. ONLY) (CONT)
WARNING
Extreme caution must be used when removing winch cable from payload. Cable
may be under tension or twisted. If winch cable has tension when removed, slowly
and carefully, using both hands, rotate cable to relieve tension. Do not allow cable
to twist or whip freely or injury to personnel may result.
3. Remove winch cable (11) clevis from shackles (25) on towing pintle (27) and attach to payload lower
curbside towing lug (29) at back of payload. Install bolt (11.1), nut (11.2), and retainer (11.3).
4. Winch operator must take up slack and continue to winch back payload until straight.
5. Reposition payload chock (19) to chock front of payload.
6. Remove winch cable (11) clevis from lower curbside towing eye (29) of payload and reconnect to
shackles (25) on towing pintle (27). Install bolt (11.1), nut (11.2), and retainer (11.3).
2-188 Change 1