TM 9-2330-381-14
11.
Secure covers (9 and 10) in place with two self-locking nuts (8). Torque nuts (8) to 300 lb-ft (407 Nm).
FOLLOW-ON MAINTENANCE
1.
2.
Start APU and check operation of gooseneck/pivot pin installation (para. 2-18).
5-25.
SUSPENSION HYDRAULIC CYLINDER
This task covers:
a. Disassembly
b. Repair
c.
Assembly
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Spanner, adjustable hook, 6.5-inch, item 28, appx. B
Drill motor, 1/2-inch, item 14, appx. B
Materials/Parts
Suspension cylinder repair kit
Thread locking compound, item 21, appx. E
Equipment Condition
General Safety Instructions
WARNING
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
Hydraulic fluid may be absorbed through the skin. Wear long sleeves, gloves, and
goggles or face shield. If hydraulic fluid gets into the eyes, flush them immediately
with water and seek medical attention. If hydraulic fluid gets on skin, wash
thoroughly with soap and water. Wash hands thoroughly prior to eating or
smoking.
5-127