BEB RETRIEVAL USING CBT (Contd)
RETRIEVE BOAT (Contd)
Transporter personnel will ensure both cab windows are fully
opened, and seatbelt is not being used by operator before
entering water. Failure to comply may result in possible injury
or death to personnel.
If depth sounder is installed, remove depth sounder prior to
retrieval of boat or damage to equipment may result.
When retrieving boat from fast moving water, ensure cradle is
in-line with transporter. CBT driver may need to reposition
CBT to correct alignment.
The high idle switch must be in the OFF position prior to
moving the LHS MODE SELECTION switch. If the MODE
SELECTION switch is moved during high idle sudden
application of hydraulic pressure to the LHS may result in
damage to equipment.
Front ground guide will inform transporter operator when it is
safe to begin operations.
Install hook safety plate (4) to CBT hook arm (5).
Transporter operator, place transmission in N (neutral) position.
Transporter operator, place transfer case shift lever (2) in LO position.
Transporter operator, release parking brake (1).
Transporter operator, place transmission in R (reverse) position.
Ground guide will signal transporter to stop when top of rear
wheel hubcap becomes even with water level.
7. Transporter operator, back transporter (6) into water, stop when top of rear
wheel hubcap (3) becomes even with water level.
8. Transporter operator, set parking brake (1).