TM 9-2320-279-l0-2
M984E1 General Operating Procedures (Cont)
(7)
Set H.D. WINCH CONTROL switch (7) to OFF.
NOTE
Do steps (8) through (10) if remote control was used for
operation.
(8)
Disconnect remote control cable (8) from receptacle (9). Install
cover (10) on receptacle.
(9)
Disconnect remote control cable (8) from HEAVY DUTY WINCH
REMOTE CONTROL (11).
(10)
Put remote control cable (8) and HEAVY DUTY WINCH REMOTE
CONTROL (11) in stowage.
(11)
Position fairlead/tensioner (12) with tensioner motor (13) on bottom.
(12)
Remove two quick pins (14) and pins (15).
Change 3