If necessary, remove coolant reservoir cap and add coolant. Use solution of 50 percent water and 50 percent
ethylene glycol (item 3, appendix D). Fill to 2 to 4 inches below top of filler neck on coolant reservoir.
Reinstall coolant reservoir cap, if removed.
Close and latch radiator access panel.
Checking and Filling:
Remove padlock (if present) from battery box hasp.
Battery box lid is heavy. Do not allow battery box lid to fall on you.
Raise battery box lid and prop open or tie back.
Battery electrolyte is toxic and corrosive. Use protective goggles and gloves when removing battery caps
and checking electrolyte. Avoid contact with skin, eyes, clothes, and don't breathe vapors. Do not smoke
or use an open flame near batteries.