d. Batteries (Continued).
Checking and Filling (Continued):
Remove battery caps from all
(4) Be sure electrolyte level in
all batteries is above plates.
Add water if necessary. Add
just enough water to bring
level 3/8 inch above plates.
Install battery caps.
Close battery box lid.
Transmission Oil Pan.
Start engine and run until engine operating temperature reaches 140 degrees. Then idle engine.
Unlatch and open engine hood.
Do not check fluid level or add transmission fluid. until engine reaches operating temperature specified
above. Failure to follow this procedure may result in excessively high transmission fluid level at operating
Remove transmission fluid level dipstick.