TM 9-2330-205-14&P
SERVICE BRAKE -ADJUSTMENT
This task covers:
Adjustment
INITIAL SETUP
Tools
Equipment Condition
Wrench, open-end, 5/8-inch
ACTION
LOCATION
ITEM
REMARKS
NOTE
Procedure is given for right side wheel.
For left side, turn adjusting stud clockwise.
1. Backing plate (1)
Upper shoe adjusting
a. Using wrench, turn
stud (2)
counterclockwise until wheel locks.
b. Back off just enough to allow
wheel to turn freely.
2.
Lower shoe adjusting
Repeat step 1.
stud (3)
TASK ENDS HERE
Super Single Style Shown
HYDRAULIC MASTER CYLINDER
This task covers:
TA223330