TM 9-2330-246-14
4-62. HYDRAULIC LINES AND FITTINGS REPLACEMENT (Con't).
4.
Connect tube assembly (10) to connector (12).
Repeat steps 1 through 4 on opposite side.
5.
Install multiple connector (7) on screw (18) using nut (8) and new Iockwasher (9).
6.
7.
Connect two tube assemblies (6 and 10) to multiple connector (7) and secure understraps (5 and 11).
Connect hose assembly (4) to multiple connector (7).
8.
Install new gasket (2) and reducer (3) in master cylinder (1). Connect hose assembly (4) to master cylinder.
9,
10.
Inspect hydraulic lines and fittings for leaks.
11.
4-153