TM 9-2330-285-14&P/TO 36A11-21-10-1
REAR AXLE BEAM - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
a. Position parts for installation.
3 Floor under rear
Axle beam (1)
of dolly set
and hydraulic
c. Raise axle beam (1) into position using
floor jack (2)
hydraulic jack (2).
4 Axle beam (1)
Hydraulic floor
a. Raise dolly set until the jackstands (4)
are free.
jack (2) and
b. Place jackstands (4) under front axle
two jackstands (4)
beam (l).
c. Lower jack (2) so that jackstands (4) are
supporting the dolly.