TM 9-2330-297-14&P
DATA PLATES
This task covers:
INITIAL SETUP
Tools
Tools - Continued
Drill, electric, portable,
Hammer, ball-peen
114-inch jaw
Punch, drive-pin, 3/16-inch
Drill, twist, 5132-inch
ACTION
LOCATION
ITEM
REMARKS
1.
Chassis side
Drivescrews (1)
a. Using 5/32-inch drill, drill heads
rail and data plate (2)
off drivescrews (1).
b.
Using hammer and punch, drive out
remainder of screws (1) and remove
data plate (2).
INSTALLATION
2.
Chassis side
Drivescrews (1)
a. Position data plate (2).
rail and data plate (2)
b. Using hammer, drive in four drive-
screws (1).
TASK ENDS HERE
TA223175
4-104