TM 9-2330-371-14&P
CLEARANCE LIGHT ASSEMBLIES
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, cross-tip
Screwdriver, flat-tip
Wrench, 3/8-inch, open-end
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
All clearance and blackout lights are replaced the
same way. Repeat this procedure for all blackout
lights.
If wire connectors are to be replaced or repaired, go
Using flat-tip screwdriver, unscrew and
Two screws (3)
Lens housing (1)
1.
take out.
and light body (2)
Lens housing (1)
Take off.
Light body (2)
2.
NOTE
If replacing lens housing only, go to step 22.
TA224221