TM 9-2330-371-14&P
BACKING PLATE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
DISASSEMBLY
Using 3/8-inch wrench and 9/16-inch
Brake guide pin (2),
Backing plate (1)
4.
wrench, unscrew and take off.
nut (3), and
Repeat for other brake guide pin.
Iockwasher (4)
Using 1/2-inch wrench and 1 1/16-inch
Anchor pin (5),
5.
wrench, unscrew and take off.
nut (6), and
Repeat for other anchor pin.
Iockwasher (7)
ASSEMBLY
Put on and tighten using 1/2-inch wrench
Anchor pin (5),
6.
and 1 1/16-inch wrench.
nut (6), and
Repeat for other anchor pin.
lockwasher (7)
Put on and tighten using 3/8-inch wrench
Brake guide pin (2),
7.
and 9/16-inch wrench.
nut (3), and
Repeat for other guide pin.
lockwasher (4)
INSTALLATION
Put backing plate (1) on axle (8) and
a.
Backing plate (1),
Axle flange (8)
8.
line up holes.
10 bolts (9), and
Be sure anchor pins are on bottom.
locknuts (10)
b. Put in bolts and locknuts and tighten
using 13/16-inch box-end wrench,
7/8-inch socket, and handle.
Put on.
Spring (11) and cap
Brake guide
9.
Repeat for other guide pin.
washer (12)
pin (2)