TM 9-2330-373-14 & P
CLEANING
1.
Remove accumulated grease with cleaning solvent (item 3, appendix E).
2.
Remove surface dirt with water and stiff brush.
INSPECTION AND REPLACEMENT
1.
Inspect housing for damage.
2.
Check operation of Jack screw. Lubricate as required. Replace leveling Jack if screw is defective.
3.
Check Jack shoe (12) for bend. Replace defective Jack shoe.
4.
Inspect pin and chain assembly for wear and damage. Replace defective parts.
INSTALLATION
1.
Position housing (4) under dolly rear
crossmember and secure with headed pin (3),
flat washer (5), cotter pin (6) and pin and chain
assembly (8).
2.
Position brace (1) and secure with headed pin
(9), flat washer (10), cotter pin (11) and pin and
chain assembly (2).
3.
Position brace (7) and secure with two pin and-
chain assemblies (2).
1.
Brace
7.
Brace
2.
Pin and chain assembly
8.
Pin and chain assembly
3.
Headed pin
9.
Headed pin
4.
Housing
10.
Flat washer
5.
Flat washer
11.
Cotter pin
6.
Cotter pin
12.
Shoe
TA 314807
4-87