TM 9-2330-373-14 & P
4-31. SPARE WHEEL CARRIER (cont)
REPLACEMENT OF WIRE ROPE
Release wire rope (10) from lower member (8)
by removing four nuts (12) and lock washers
(11) from U-bolts (9).
Draw wire rope (10) from holes in ratchet wheel
Make a wire rope with ferrules to prevent
raveling, from six feet of 3/16-inch diameter, 7 by
19 aircraft type, preformed wire rope.
Aline four holes in carrier upper member with
holes in chassis.
Secure carrier with four screws (6), lock washers
(5) and nuts (4).
THIS TASK COVERS
Inspection and replacement
16 Jack is hard to operate
17 Jack shoe will not set
Test Equipment Required: