TM 9-2330-373-14 & P
5-7. AXLE ASSEMBLY (cont)
INSTALLATION
1. Connect hydraulic hose to tee at center of axle.
2. Insert rubber wrappers
(4)
in position in
equalizing arms (3).
4. Place support under axle.
5. Check rubber wrappers (4) to make certain they
are not pinched.
6. Place rubber pads (5) in axle connection caps
(6).
7. Place axle connector pads (6) under axle and
insert rod bolts (1) and (2).
8. Secure bolts (1) and (2) with eight nuts (8) and
washers (7).
9. Torque nuts (8) alternately until axle connection
metal to metal.
12. Connect hydraulic hoses.
13. Close air reservoir drain cock
14. Remove blocking and support equipment.
TA 314860
5-11