TM9-2330-374-14&P
1.
Camshaft
5.
Seal
9.
Washer
13. O-ring
2.
S n a p ring
6.
Bushing
10.
Screw
1 4 . Bushing
3.
Washer
7.
Seal
11.
Retainer
15. O-ring
4.
Spider
8.
Nut
12.
Retainer
Dana axle brake camshaft
(3) Remove seal (5),
bushing (6) and seal (7).
( 4 ) R e m o v e f o u r n u t s ( 8 ) , w a s h e r s ( 9 ) a n d s c r e w s ( 1 0 ) . R e m o v e three nuts (8),
w a s h e r s (9) and screws (10) when removing a Dana axle brake camshaft.
(5) Remove retainer (11), retainer (12), preformed packing (13), bushing (14)
a n d p r e f o r m e d p a c k i n g ( 1 5 ) . F o r Dana axle brake camshaft, remove retainer
(11), retainer (12), o-ring (13), bushing (14) and o-ring (15).
( 6 ) Remove camshaft (1).
b.
Installation.
(1) Install preformed packing (15, figure 4-36), bushing (14), preformed
packing (13), retainer (12) and retainer (11) for Standard Forge and Axle
camshaft.
bushing (14), o-ring (13, retainer (12) and retainer (11).
(2) Install four screws (10), washers (9) and nuts (8) for Standard Forge and
A x l e b r a k e c a m s h a f t . F o r Dana axle brake camshaft, install three screws
(10), washers (9) and nuts (8).
(3) Install seal (7), bushing (6) and seal (5).
4-64