TM 9-2330-383-14&P
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Air tanks drained
Materials/Parts
Lockwasher (4)
REMOVAL
NOTE
There are two relay valves, one at the right front of the HEMAT, and
one at the right rear.
Tag hoses and tubes for identification before disconnecting.
a. At right front relay valve (1), tag and disconnect three tubes (2, 3 and 4)
and two hoses (5 and 6) from relay valve (1).
b. Remove two nuts (7), lockwashers (8), washers (9), screws (10) and relay
valve (1).
c. Remove tee (11) and two elbows (12 and 13).
d. At right rear relay valve (14), tag and disconnect two tubes (15 and 16) and
two hoses (17 and 18).
e. Remove two nuts (19), lockwashers (20), washers (21), screws (22) and relay
valve (14).
f. Remove four elbows (23, 24, 25 and 26).
4-50