TM 9-2330-386-14&P
ORGANIZATIONAL TROUBLESHOOTING TABLE - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BRAKES - continued
7. BRAKES DRAG AND ONE OR MORE BRAKE DRUMS RUNNING HOT.
S t e p 1.
C h e c k brake adjustment.
a. If brakes
are out of adjustment or adjusted too tightly, check
operation
defective
slack adjusters.
b. If brakes
are not out of adjustment, go to step 2.
R e m o v e brake drum (para. 4-38) and check for broken brake shoe
S t e p 2.
tension spring.
b. If spring is not defective, go to step 3.
Visually check for broken or frozen camshaft roller. Look for flat
S t e p 3.
spots on camshaft roller and camshaft.
C . If camshaft and roller are not defective, go to step 4.
S t e p 4.
Check for cracked, scored or deformed brake drum.
b. If brake drum is scored, notify direct support maintenance.
LANDING GEAR
8. DIFFICULTY IN TURNING HANDCRANK.
Step 1. Check for bent lower leg.
b. If lower leg is not bent, go to step 2.
Operate crank and listen for grinding gears or bearings in landing
S t e p 2.
leg gear box.
If gears or bearings grind and legs do not extend or retract
properly, replace landing leg with assembled gear box (para. 4-45).
4-20