Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
BOTH FRONT MARKER
7.
If continuity is not present,
LIGHTS DO NOT
replace 24 vdc intervehicular
ILLUMINATE - CONTINUED
2.
Check for continuity
1.
Close cover on voltage
between terminal lug TL262
converter box (WP 0052 00).
and a known good ground.
2.
Set digital multimeter to
ohms.
3.
connect positive (+) probe
of digital multimeter to
terminal lug TL262.
4.
Connect negative (-) probe
of digital multimeter to a
known good ground and
not reading on digital
multimeter.
5.
If continuity is not present,
repair wire between terminal
lug TL262 and terminal lug
replace electrical cable
assembly.
0036 00-33


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business