WHEEL STUD REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Installation, Operational Check
Tools and Special Tools
Tool Kit, Genl Mech (Item 37, WP 0178 00)
Brake shoes removed (WP 0055 00).
Respirator, Air Filter (Item 23, WP 0178 00)
Spring brakes must be caged before attempting replacement of a rear wheel
stud. Failure to comply may result in severe injury to personnel.
Wheel drum weighs approximately 90 lbs (41 kgs). Use the aid of an assistant
to help remove wheel drum. Failure to comply may result in injury to
Brake shoes may be covered with dust. Breathing this dust may be harmful to
your health. Do not use compressed air to clean brake shoes. Wear a filter
mask approved for use against brake dust. Failure to comply may result in
injury to personnel.
Wheel studs and nuts on left side of trailer have left hand threads. Nuts must be turned
clockwise to loosen. Wheel studs and nuts on right side of trailer have right hand
threads. Nuts must be turned counterclockwise to loosen. Failure to comply may result
in damage to equipment.