FILLING THE TANK (Continued)
If required, install electrical
electrical receptacle (2).
When tank is full, immediately close 3-lug
bayonet type nozzle.
Remove 3-lug bayonet type nozzle from
refueling adaptor and install dust cap on nozzle.
Remove plug (1) from electrical receptacle (2)
by lifting junction box hinged cover (3) up and
pulling plug straight out.
Depress drain button (1) for a minimum of 10
CLOSING THE TANK.
operation is complete, close the tank as follows:
Install pressure cap (1) on pressure adaptor
plate (2) as follows:
(1) Carefully place pressure cap (1) on pressure
adaptor plate (2), making sure cams are
(2) Press straight down on the pressure cap (1)
and rotate the cap clockwise until it is