TM 9-4110-246-14
TO 40R7-5-10-1
3-32. REMOVE/INSTALL PILOT LIGHT HOUSING ASSEMBLY.
TOOLS: Screwdriver, Flat Tip
REMOVAL
WARNING
The lighting circuit operates on 125V ac. Disconnect power to power receptacle before
beginning this procedure. Failure to heed this warning may result in death or serious
injury.
1. Remove switch cover and switch assembly.
2. Carefully pull out switch assembly from door frame panel assembly.
3. Tag and disconnect wires from switch assembly; remove pilot light housing assembly.
INSTALLATION
1. Connect replacement pilot light housing assembly wires.
2. Position switch and switch plate assembly onto door frame panel assembly.
3. Reconnect power supply cord to power receptacle.
3-36