TM9-4120-370-14
T035E9-229-1
4-66. SAFETY CONTROL BOX WIRING HARNESS -Continued.
b. Repair
(2) See Table 43 (Wire List) for wire lengths and terminal or connector Information.
c.
Remove
(1) Tag and disconnect wire leads.
(2) Using screwdriver and ratchet wrench with extension, remove four screws and nuts from J16 connector,
(3) Remove J16 harness.
d. Installation
(1) Using screwdriver and ratchet wrench with extension, secure J16 connector and harness with four screws
and nuts.
(2) See tags and wiring diagram (Figure 4-20) and connect wire leads,
(3) Remove tags.
(4) Slip panel back into safety control box and aline holes,
(5) Using screwdriver, secure panel to safety control box with four flat head screws,
Followon procedure:
4-124