TM 9-4120-388-14
5-17. SERVICE VALVES - Continued.
Installation.
c.
(1) Position valve in unit as noted during disassembly.
(2) Restrain valve body and tighten flare nut.
(3) Secure valve and cap and chain with screw, flat washer, Iockwasher, and clamp.
(5) Leak test the newly connected joints and all connections in those areas. (See para 5-10.)
(6) Evacuate and charge the system. (See para 5-11 and 5-12.)
(7) Be sure that valve stem and hose connection protective caps are in place on valves.
5-39