TM9-4120-400-14
5-29.
10, Coil and secure excess capillary line (5) with tie down strap (7).
11. See tags and wiring diagram figure 4-4 and connect wire leads. Remove tags.
NOTE
FOLLOW-ON MAINTENANCE:
SERVICE (CHARGING) VALVES.
Replacement
This task covers:
INITIAL SETUP
Equipment Condition
Tools
Refrigeration Unit Service Tool Kit
Service Charging Valve
Lock Washer
REPLACEMENT
1.
Remove screw (1), lock washer (2), flat washer (3), cap and chain (4), and loop clamp (5) from the valve (6) to
be replaced.
2.
Disconnect flare nut (7) and remove valve (6).
3.
Slip valve (6) in place and tighten flare nut (7).
4.
Secure valve (6) and cap and chain (4) with loop clamp (5), screw (1), lock washer (2), and flat washer (3).
NOTE
FOLLOW-ON MAINTENANCE:
5-68