TM 9-2330-381-14
2-20.
OPERATING LOADING RAMPS (CONT)
(4) Insert small end of crowbar (5) through hole in ramp lift lever (6) into bar strip (7).
(5) Position one person on rear of platform to push ramp rearward against stow chain until ramp is perpendicular
to platform. Second person must push or pull on crowbar (5) in direction required to slide ramp (8) outboard
from center.
(6) Continue to place crowbar (5) into holes along bar strip (7) and move ramp to furthest outboard position.
(7) Repeat steps (1) thru (6) above and adjust remaining ramp.
2-60 Change 3