TM 9-2330-381-14
INSTALLATION
1.
Install pulley (12) and flywheel (8) on crankshaft (9) and secure with three lockwashers (15) and bolts (14).
2.
Install key (13), flywheel (8), and key washer (6) on crankshaft (9). Install belt (11) over pulley (12).
3.
Apply thread locking compound to threads of nut (7) and install.
4.
Using a block of wood to prevent flywheel (8) from turning and a torque wrench, torque nut (7) to 101 - 116 lb-ft
(137 - 157 Nm). Bend key washer (6) to meet one face of nut (7).
5.
Install shaft coupling (5) and secure with three bolts (4).
6.
Install flywheel housing (3) and secure with two bolts (2) and four bolts (1).
5-28. INJECTION PUMP
This task covers:
a. Removal
b. Installation
c. Adjustment
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Torque wrench, 3/8" drive, 0-150 lb-in, item 14, appx. B
Materials/Parts
Gasket
Gasket
Shim
Shim(s)
Personnel Required:
2
Equipment Condition
5-143