TM 9-2330-381-14
4-103. AIR CLEANER ASSEMBLY (CONT)
INSTALLATION
1.
Install flow valve (12) to flange (4).
2.
Install body (17) to flange (4) and tighten setting bolt (16).
3.
Install gasket (15) and flange (4) and secure with bolt (14) and two bolts (13). Torque bolts (14 and 13) to
2.2 - 3.6 lb-ft (2.9 - 4.9 Nm).
4.
Connect hose (11) to flow valve (12), slide compression fitting (10) up to flow valve, and tighten compression
fitting.
5.
Install gasket (9), air filter element (8), cap assembly (7), and grommet (6) and secure with wingnut (5).
6.
Secure bracket (3) to flange (4) with bolt (2). Tighten bolt (1).
4-104. FUEL TANK ASSEMBLY
This task covers:
a. Removal
c. Cleaning
e. Installation
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Drain pan, item 18, appx. B
Gloves, chemical and oil protective, item 18, appx. B
Goggles, industrial, item 18, appx. B
Materials/Parts
Diesel fuel, item 9, 10, or 11, appx. E
Cap and plug set, item 5, appx. E
Lockwasher (2)
Equipment Condition
Step assembly raised (para. 2-13)
General Safety Instructions
WARNING
Diesel fuel is combustible and is an irritant to the eyes, skin, and respiratory
system. To avoid injury to personnel and explosion, extinguish all smoking
materials and do not allow sparks or open flame near the fuel tank or the fuel
system. Use skin and eye protection and work in a well-ventilated area.
4-492
