TM 5-1940-322-10
OPERATOR INSTRUCTIONS
BRIDGE ERECTION BOAT (BEB)
MK II-S
P/N 12492423
BEB RETRIEVAL USING CBT
WARNING
Prior to performing transporter operations, ensure a site
survey is conducted. Failure to meet all site requirements for a
given launch method may result in possible injury or death to
personnel and damage to equipment.
Ensure all engine hatches are closed and secured while boat is
under operation. Failure to comply may result in injury or
death to personnel.
When retrieving boat, side to side slope must not exceed 8% or
5 degrees. Failure to comply may result in possible injury or
death to personnel and damage to equipment.
NOTE
This work package covers boat retrieval instructions using the
CBT and IBC. Retrieval instructions using M945 or M812
trucks is not covered.
SITE REQUIREMENTS
In order to launch boat and construct a bridge or raft, it is necessary to locate a site
based on a list of technical site requirements. The operator/crew must understand
and observe the following site requirements when performing BEB retrieval.
1. Ensure launch site conditions exist for deployment of boat. Refer WP 0009 00.
If launch site conditions do not meet requirements, notify supervisor.
2. Ensure launch site requirements and layouts exist for deployment of boat. Refer
to WP 0009 00. If launch site conditions do not meet requirements,
notify supervisor.
0011 00-1