TM 5-1940-322-10
OPERATOR INSTRUCTIONS
BRIDGE ERECTION BOAT (BEB)
MKII-S
P/N 12492423
HIGH SPEED STOP
WARNING
Do not drop (lower) scoop reverse deflectors during high
speed movement! Failure to comply may result in injury
or death to personnel and damage to equipment.
Ensure all engine hatches are closed and secured while
boat is under operation. Failure to comply may result in
injury or death to personnel.
High Speed Stop (engine rpms 1800 and above).
1. Center STEERING WHEEL (1).
2. Warn all crewmembers of high speed stop.
3. Grasp both engine THROTTLE/TRANSMISSION control levers (2), rapidly
reduce engine rpm by moving both control levers to idle position.
4. Operator must be aware of water flow over hydrojets and into the aft cockpit
(bird bath) during high speed stop. To avoid water flow over hydrojets, increase
engine rpm speed by slowly moving THROTTLE/TRANSMISSION control
levers (2) forward.
2
1
END OF WORK PACKAGE
0022 00-1/(2 Blank)