TM 5-1940-322-10
0049 00
MAINTENANCE PROCEDURES (Contd)
FILLING ENGINE OIL (Contd)
2. Remove engine oil dipstick (3) from dipstick tube (2).
3. Remove engine oil filler cap (1) from valve cover (4).
4. Check that oil is between ADD and FULL marks.
NOTE
If oil is below add mark, add oil. During filling of engine oil,
check level on dipstick often to avoid overfilling.
5.
Insert and remove dipstick (3) to check oil level.
6.
Fill oil level to FULL marks on dipstick (3).
7.
Insert dipstick (3) into dipstick tube (2).
8.
Install oil filler cap (1) on valve cover (4).
9.
Perform steps 2 through 8 for other engine.
10.
Close engine compartment access hatches WP 0004 00.
2
1
4
3
ADD
FULL
3
0049 00-13
