TM 5-2420-230-10
Table 3-4. Troubleshooting Table. (Continued)
Malfunction
Test or Inspection
Corrective Action
17.
NO IGNITION, STARTER WILL NOT CRANK, ENGINE CRANKS SLOWLY, LOW BATTERY
OUTPUT, CHARGING INDICATOR LIGHT REMAINS ON, OR NOTHING WORKS.
Step 1.
Ensure transmission selector (1) is in N (Neutral) and electrical master switch (2) is ON.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts battery terminal, a direct
short may result in instant heating of tools, damage to equipment, and injury or death to personnel.
Step 2.
Check battery cable connections (3) at battery, starter solenoid, and ground for looseness and corrosion.
Tighten any loose connections.
Step 3.
Check the appropriate circuit breaker in the Power Distribution Panel (PDP) box (4).
If circuit breaker is tripped, reset circuit breaker (Para 4-16).
If circuit breaker is not tripped, trips again, or will not reset, notify Unit maintenance.
18.
FRONT OR REAR WIPERS, HYDRAULIC POWER, OR EGS POWER DOES NOT WORK.
Step 1.
Check the appropriate circuit breaker in the Power Distribution Panel (PDP) box (1).
If circuit breaker is tripped, reset circuit breaker (Para 4-16).
If circuit breaker is not tripped, trips again, or will not reset, notify Unit maintenance.
