TM 5-2420-230-10
The FEL 4-in-1 bucket may be removed and installed
with a forklift attachment. The forklift attachment is
rated at lifting a 4,409-lb. (2 000-kg) load at 20-in.
(500-mm) load centers.
a. Installation.
(1)
With the aid of an assistant, remove 4-in-1
(2)
Position forklift attachment upright on level
ground.
(3)
Drive vehicle up to forklift attachment,
ensuring loader arms are lower than
mounting lugs and approach is made at
90 degrees to attachment.
(4)
Carefully raise loader arms to engage
(5)
Ensure loader arms have fully engaged both
mounting lugs.
(6)
Raise forklift attachment until it is just clear
of ground.
(7)
Move locking lever to locked position and fit
locking pin.
(8)
Ensure both locking pins are fully engaged.
(9)
Check operation of forklift attachment
b. Forklift Operation.
When using forklift attachment, always use a guide. The guide should stand clear of vehicle. Failure to
comply may result in injury or death to personnel.
c. Removal.
(1)
Position vehicle on level ground.
(2)
(3)