TM 55-1925-282-14&P
0027 00
6
6
8
7
7
2
5
5
4
3
10
9
1
Figure 1. Charcoal Filter Assembly
ASSEMBLY
1. Install the pipe fittings (figure 1, item 5) into the lid (figure 1, item 2).
2. Position the lid (figure 1, item 2) to the mounting bracket (figure 1, item 8), and secure it in place with four
bolts (figure 1, item 6) and four flat washers (figure 1, item 7).
3. Connect the outlet tubing (figure 1, item 4) and inlet tubing (figure 1, item 3) to the pipe fittings (figure 1, item 5).
4. Inspect for and remove any debris and foreign matter from the filter bowl (figure 1, item 1).
5. Thoroughly clean the lid (figure 1, item 2), using fresh water and clean rags.
6. Place a new carbon briquette (filter element) (figure 1, item 9) into the filter bowl (figure 1, item 1).
7. Lubricate a new O-ring (figure 1, item 10) with silicone lubricant and install it in the groove in the filter bowl
(figure 1, item 1).
0027 00-2