TM 55-1925-283-12&P
0005 00
6. OPEN the supply valve for the fuel tank selected in step 5 above.
a. If tank 1S was selected, OPEN valve FO-55 F.O. TK 1S SUCT (figure 1, item 12).
b. If tank 1P was selected, OPEN valve FO-56 F.O. TK 1P SUCT (figure 1, item 13).
c.
If tank 2S was selected, OPEN valve FO-57 F.O. TK 2S SUCT (figure 1, item 14).
d. If tank 2C was selected, OPEN valve FO-60 F.O. TK 2C SUCT (figure 1, item 15).
e. If tank 2P was selected, OPEN valve FO-58 F.O. TK 2P SUCT (figure 1, item 16).
WARNING
Diesel fuel is flammable and diesel fuel vapors can be explosive. Make sure all
work is performed in a well ventilated area. Keep sparks, open flame, and exces-
sive heat away from the work area. Failure to comply with this precaution can
result in death or serious injury.
Avoid prolonged exposure of the skin to diesel fuel. Protective nitrile gloves and
chemical protective goggles must be worn whenever handling diesel fuel or parts
that are saturated with diesel fuel. Failure to comply with this precaution can
result in serious injury.
7. OPEN the discharge valve from the fuel transfer pump selected in step 4 above.
a. If fuel transfer pump 1 will be used, OPEN valve FO-8 C.O.V.- F.O. XFER PMP NO.1 DISCHARGE
(figure 1, item 17).
b. If fuel transfer pump 2 will be used, OPEN valve FO-9 C.O.V.- F.O. XFER PMP NO. 2 DISCHARGE
(figure 1, item 18).
8. Select a destination day tank for the fuel transfer pump.
a. If the starboard day tank is selected, OPEN valve FO-1 F.O. DAY TK. FILL (figure 1, item 19).
b. If the port day tank is selected, OPEN valve FO-2 F.O. DAY TK. FILL (figure 1, item 20).
9. CLOSE valves FO-11 F.O. TO E.D.G. DAY TK (figure 1, item 21) and FO-5 F.O.DAY TK EMERG FILL
(figure 1, item 22).
10. Place several wiping rags around the vent valve (figure 1, item 8) to catch any fuel that escapes during
priming.
11. OPEN the vent valve (figure 1, item 8).
12. Start the fuel transfer pump (TM 55-1925-273-10) selected in step 4 above and closely observe the vent
valve (figure 1, item 8).
13. Leave the vent valve (figure 1, item 8) OPEN until fuel begins to escape. CLOSE the vent valve as soon as
the fuel begins to escape.
0005 00-4
