TM 55-1925-284-14&P
0028 00
INTERRUPT CONTACTOR REPLACEMENT
REMOVAL
1. Perform the Open the Controller procedure at the beginning of this work package.
2. Label and disconnect the wiring (figure 8, item 1).
3. Remove the four mounting screws (figure 8, item 2) securing the interrupt contactor (figure 8, item 3).
4. Remove the interrupt contactor (figure 8, item 3) from the enclosure.
1
3
2
1
Figure 8. Interrupt Contactor Replacement
INSTALLATION
1. Position the interrupt contactor (figure 8, item 3) in the enclosure and secure it with the four mounting screws
(figure 8, item 2).
2. Connect the wiring (figure 8, item 1) using the labels from step 2 of Removal as a guide. Remove the labels.
3. Perform the Follow-On Service procedure at the end of this work package.
0028 00-9
