TM 55-1925-284-14&P
0028 00
HANDLE REPLACEMENT
REMOVAL
1. Perform the Open the Controller procedure at the beginning of this work package.
2. Remove the three screws (figure 4, item 1) securing the retaining ring (figure 4, item 2) and remove the
retaining ring.
3. Remove the handle (figure 4, item 3) from the enclosure door (figure 4, item 4).
4
2
3
1
Figure 4. Handle Replacement
INSTALLATION
1. Position the handle (figure 4, item 3) in the enclosure door (figure 4, item 4).
2. Secure the handle (figure 4, item 3) with the retaining ring (figure 4, item 2) and three screws (figure 4,
item 1).
3. Perform the Follow-On Service procedure at the end of this work package.
0028 00-4
