TM 55-1925-284-14&P
0028 00
FOLLOW-ON SERVICE
1. Position the handle (figure 1, item 3) to the RESET position, and CLOSE the controller door (figure 1, item 2).
When the controller door is fully closed, release the handle.
2. Secure the controller door (figure 1, item 2) with the nine captive retaining screws (figure 1, item 1).
3. Remove the lockouts and tagouts (FM 55-502).
4. Return the MSD to operation under usual conditions (WP 0005 00) and check for normal operation of the
discharge pump and blower.
5. Return the equipment to the desired readiness condition.
END OF WORK PACKAGE
0028 00-10
