TM 55-1925-284-14&P
0029 00
! CAUTION
Exercise care not to damage the lip drive seal as it passes over the drive shaft's keyway.
Failure to comply will result in damage to the equipment.
43. Carefully install the new lip drive seal (figure 1, item 33) over the drive shaft (figure 1, item 4) and into the drive
end head plate (figure 1, item 21). Drive the new lip drive seal until it is flush with the drive end head plate.
44. Install a new gasket (figure 1, item 10) on the gearbox cover (figure 1, item 8) and install the gearbox cover
on the gear end head plate (figure 1, item 9).
45. Install the eight bolts (figure 1, item 7) in the gearbox cover (figure 1, item 8). Tighten the eight bolts securely
using a crisscross sequence pattern.
46. Carefully install the key (figure 1, item 5) into the keyway (figure 1, item 6).
NOTE
Ensure that the sheave has a slight slide fit on the shaft.
47. Install the taper lock sheave (figure 1, item 2) onto the drive shaft (figure 1, item 4) and secure it with the two
bolts (figure 1, item 1).
END OF WORK PACKAGE
0029 00-10