TM 55-1930-208-10
SECTION II. OPERATOR/CREW TROUBLESHOOTING PROCEDURES
3-2. OPERATOR/CREW TROUBLESHOOTING PROCEDURES.
a. Table 3-1 lists the common malfunctions which you may find during the operation or maintenance of the vessel
or its components. You should perform the tests/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions. If a
malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
Table 3-1. Operator/Crew Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSFER OF CARGO
1. CARGO WILL NOT ENTER VESSEL.
Step 1. Insure valves are open.
Open valves if closed.
Step 2. Check if valves on dock are properly lined up.
Notify dock representative.
Step 3. Check pressure on shore line.
Notify dock representative.
Step 4. Inspect for disengaged valve stem.
Stop operations. Notify higher level maintenance for repair.
2. REDUCTION GEAR RUNS EIOT.
Step 1. Check level of lubricating oil.
Drain or add oil as required to bring to proper level.
Step 2. Check for misalignment.
Report misalignment to higher level maintenance.
3-3
