TM 55-1930-208-10
3- 10. HAND PUMP, HYDRAULIC START SYSTEM.
This task covers:
a.
Removal
b.
Disassembly
c.
Cleaning
d.
Inspection
e.
Repair
f.
Reassembly
g.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
Brush, Medium Bristle (Item 3, Appendix D)
Cloth, Soft (Item 2, Appendix D)
Gland P/N BG200603
Gland P/N GA100097
O-Ring P/N GA100213
O-Ring P/N GA100215
O-Ring P/N GA100113
O-Ring P/N GA100108
O-Ring P/N GA100110
O-Ring P/N GA100111
Ring P/N GA100214
Ring P/N RG100209
Ring P/N RG100102
Ring P/N RG100208
Sealant, Pipe (Item 12, Appendix D)
Washer, Lock P/N MS35338-46
Solvent, Dry Cleaning (Item 1, Appendix D)
Equipment Conditions:
Engine shut down (paragraph 2-11).
Vessel is moored (paragraph 2-7).
a. Removal. (Refer to figure 3-6).
(1) Open relief valve on hand pump and release system pressure.
(2) Remove hoses (1 thru 4).
(3) Remove two tees (5), gage (6), elbow (7), and tee (8).
(4) Remove valve (9) and elbow (10).
(5) Remove four nuts (11), four lockwashers (12), four bolts (13), and hand pump (14).
3-22
