TM 55-1930-208-10
3-25. LIGHTING.
This task covers:
a.
Removal
b.
Inspection
c.
Disassembly
d.
Repair
e.
Reassembly f.
Installation
SET-UP:
Tools Required:
Tool Kit, General Mechanic's
Materials Required:
O-Ring P/N 8020-0102
Washer, Lock P/N MS35338-140
Equipment Conditions:
Engine shut down (paragraph 2-11).
Vessel is moored (paragraph 2-7).
a. Removal. (Refer to figure 3-23).
(1) Remove four nuts (1), four lockwashers (2), and four bolts (3).
(2) Remove battery box and light as an assembly.
NOTE
There are five lights on the barge. The only difference between the lights is the color of their lens and bulb
amperes.
b. Inspection.
(1) Inspect each light for broken lens.
(2) Inspect each light for burned out lamps.
(3) Inspect each light photo cell for proper operation.
(4) Inspect each light for a damaged switch.
(5) Inspect each light for broken or frayed wiring in battery box.
(6) Inspect power cable for damaged connector, or broken or frayed wiring in battery box.
3-56
