TM 9-1330-200-12/TM 1330-12/1A
(h) Carefully insert one practice hand gre-
DO NOT ATTEMPT TO THROW THE
GRENADE THROUGH GLASS OR WIN-
nade charge in body through opening in bottom (A, fig. 2-
DOW, SINCE IT MAY NOT BREAK THE
GLASS OR WINDOW AND COULD
BOUNCE BACK TOWARD THE USER.
(2.1) M102 Reloadable Stun Practice Hand Grenade
THE M102 HAS THE POTENTIAL TO
IGNITE FLAMMABLE VAPORS.
DO NOT PRACTICE "COOK-OFF" WITH
ONLY TRAINING INSTRUCTORS ARE
THIS GRENADE, SINCE IT HAS A SHORT
ALLOWED TO ASSEMBLY AND RELOAD
FUZE DELAY TIME OF 1.0 TO 2.3 SEC-
THE M102 RSPHG.
PERSONNEL CONDUCTING ASSEMBLY
HUMAN TARGET PARTICIPATION IS
AND RELOADING OPERATIONS ON THE
NOT ALLOWED DURING TRAINING.
M102 RSPHG OR STANDING WITHIN THE
IMMEDIATE PROXIMITY OF A FUNC-
AVOID PROLONGED EXPOSURE SINCE
THERE IS POTENTIAL FOR TOXIC FUME
REQUIRED TO WEAR LONG SLEEVES,
HAZARDS BUILDING UP IN ENCLOSED
GLOVES, AND EYE PROTECTION.
SPACES DURING TRAINING.
REMAIN IN SHIPPING/STORAGE CON-
Secondary safety pin must be pulled prior to pull-
TAINERS WHEN TRANSPORTED BY
ing the primary safety pin.
NEVER ATTEMPT TO USE GRENADE
After the grenade has functioned, wait 5 minutes
BODY WHICH HAS ANY SIGN OF METAL
for the body to cool prior to conducting reloading
FAILURE (CRACKS OR BULGES).
1. Hold grenade in throwing hand with
The M102 RSPHG is normally issued as separate
thumb holding safety lever firmly against grenade body.
components, as required. Components consist of
2. Pull the secondary safety pin with
a Practice Stun Hand Grenade Body and an M240
the triangular pull ring first with the free hand.
Stun Hand Grenade Fuze Cartridge. These items
3. Then pull the primary safety pin
are packed separately.
with the circular pull ring with the free hand, holding the gre-
(a) Remove M102 Practice Grenade Body
nade safety lever tightly against grenade body.
from packing box and inspect for signs of metal failure (cracks
4. When the two safety pins have been
or bulges), condition of threads and the bottom sticker for bod-
removed, the M102 RSPHG is armed and must be thrown.
ies used 25 times. Return defective practice grenade bodies or
Never attempt to replace safety pins.
those used 25 times to ammunition supply personnel for dispo-
5. After the grenade has functioned,
wait 5 minutes for the body to cool.
6. To disassemble the grenade, hold
the body with one hand and unscrew the M240 Fuze Cartridge
NEVER ATTEMPT TO REMOVE ANY
FUZE CARTRIDGE FROM ITS PACKING
with the other hand.
IF SAFETY PIN IS MISSING. IDENTIFY
DEFECT(S), REPLACE PACKING AND
IF GRENADE FAILS TO FUNCTION (I.E.,
DUD), NOTIFY AUTHORIZED EXPLO-
PLY PERSONNEL FOR DISPOSITION.
SIVE DISPOSAL PERSONNEL AND
NEVER HANDLE FUZES BY PULL RINGS
OBSERVE 30-MINUTE WAITING PERIOD.
OR BY GRASPING CARTRIDGE ASSEM-
DO NOT TOUCH OR HANDLE A DUD
(b) Remove M240 Fuze Cartridge from
AFTER FUNCTIONING, IF CARTRIDGE
M19A1 container and inspect for deformation, cracks, loose
BECOMES LOOSE OR SEPARATED
cartridge, and corrosion.
FROM THE M201A1 MODIFIED FUZE
(c) Holding fuze cartridge in one hand, screw
WHEN ATTEMPTING TO DISASSEMBLE
THE M240 FROM THE GRENADE BODY
AND THE CARTRIDGE CANNOT BE
UNSCREWED SAFELY FROM THE GRE-
NADE BODY, IDENTIFY THE DEFECT(S)
The M240 Fuze Cartridge comes assembled with
AND TURN IN TO AMMUNITION DIS-
a primary safety pin with a circular pull ring and a
secondary safety pin with a triangular pull ring
After each use, a knife or sharp instrument may be
needed to remove each numeric segment of the
Prepare M102 RSPHG for throwing as
sticker on the base of the grenade body.
7. Recover and remove any debris
ALL PERSONNEL MUST WEAR HEAR-
from the Practice Grenade Body. Also, remove the numerical
ING PROTECTION DURING TRAINING
sticker sequentially from the base of the grenade body (fig. 2-
EXERCISES. PERSONNEL INSIDE AN
wipe clean the grenade body with
a rag and
ENCLOSURE WHERE A STUN GRENADE
cleaning solvent to remove explosive residue build-up. Do not
IS FUNCTIONED MUST WEAR DOUBLE
reuse bodies that have been used 25 times.