TM 9-1330-200-12/OP 3833 1st Rev. Vol 2/TM 1320-12/1A
(4) Inspect Rifle Grenades M31 for condition
(6) Remove tape from vent in nose of Smoke
of nose protector cap. If cap is dented, return grenade
Rifle Grenade M23 Series just prior to firing. Replace
tape if grenade is not fired.
(5) Inspect stabilizer tube and fin assembly.
(7) Do not puncture or disassemble rifle
If either is dented or deformed, return grenade to
grenades.
b. Preparation for Use.
c. Operation. For rifle grenade firing procedures,
(1) Remove container from packing box.
refer to applicable rifle operator manuals. For tactical
(2) Open container and remove rifle grenade.
use of rifle grenades, refer to FM 2330.
(3) See that safety wire in Grenades M19A1
and safety clip on Grenades M22 Series are in place. If
safety wire or safety clip is not in place, but available,
install as indicated in figure 2-8. If safety wire or safety
clip is not available, leave grenade in place and contact
authorized disposal personnel for disposition.