TM 9-1330-200-12/TM 1330-12/1A
(4) Assure box is marked with proper item
3-14. Repacking
L8A1 Grenades, L8A3 Gre-
nades
(5)
Close box, secure hasp, and band box.
a. Place packing and grenades into metal container.
b. Repacking M76 and M82 Smoke Grenades.
b. Close metal box.
NOTE
c. Assure box is marked with correct item, nomencla-
ture, and lot number.
If strap loops are not contained in
the packing, repack the spacers and
grenades inside the ammunition
box.
Prior to repacking, inspect to assure
grenades, box, and packing are ser-
viceable, clean and free of dirt and
moisture.
(1) Lay bottom halves of spacer on flat sur-
face (fig. 3-12)
(2) Position a pair of grenades in spacer con-
tours with contact ends facing opposite directions.
(3) Align slider/borerider facing toward the
adjacent grenade (fig. 3-12).
(4) Position top halves of spacer on top of
3-15. Repacking
M90 Grenades
grenades.
NOTE
(5) Assure that slider/borerider is properly
aligned.
Prior to repacking, inspect to ensure
grenades, box, and packing are ser-
CAUTION
viceable, clean, and free of dents,
dirt and moisture.
Slider/Borerider should not be in
a. Lay bottom halves of spacer on flat sur-
contact with Space
(6) Loop pull strap lengthwise over the gre-
nade/spacer assembly.
b. Position a pair of grenades in spacer con-
tours with electric contact ends facing opposite
(7) Slide strapped grenade/spacer assembly
directions.
to prevent twisting or kinking of strap (fig. 3-2).
c. Position top halves of spacer on top of gre-
(8) Assure that strapped grenade/ spacer
nades.
assembly sits on bottom of box assembly.
d. Repeat steps a through c to load second
(9) Lay strap flat on top of grenade/ spacer
assembly; fold if necessary.
positioned opposite those on the grenade below it on
(10) Repeat steps 1 through 9 to load second
the first layer.
pair of grenades into box.
(11) Close cover, latch, and seal ammunition
e. Close the cover, latch it, and seal the
box.
ammunition box.